What We Do | Yosemite National Park Roofing & Maintenance Roofing Services
Yosemite National Park Roofing & Maintenance offers a complete range of roofing services in Yosemite National Park and Alleghany, Bridgeport, Colusa, Essex, Hawthorne. Every job gets the same attention. Big or small.
Roof Replacement
Replacement cost depends on your roof size, pitch, and material choice. We quote by the square (100 sq ft) and itemize everything so you can compare apples to apples. In Yosemite National Park, most residential replacements fall between $8,500 and $24,000. We offer financing if that helps.
Get a Free Quote →
Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Yosemite National Park homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →
Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our Yosemite National Park inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →
New Roof Installation
For Yosemite National Park new builds, we recommend Tamko Heritage or Malarkey Vista AR for budget-conscious projects and Atlas Pinnacle Pristine with Scotchgard for algae-resistant performance. High-end builds get GAF Timberline HDZ or Owens Corning Duration STORM. Each carries different warranty tiers. We walk you through the comparison so you're choosing with real information, not marketing brochures.
Get a Free Quote →
Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our Yosemite National Park crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →
Shingle Roofing
Shingle color matters more than you think. Dark shingles absorb heat. Great for cold California winters, harder on cooling bills in summer. Lighter colors reflect heat. Algae-resistant granules prevent black streaking. We bring shingle samples to your Yosemite National Park home so you can see them against your siding and trim.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Yosemite National Park. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →
Commercial Roofing
Multi-family properties in Yosemite National Park need roofing contractors who understand occupied buildings. We schedule around tenants, contain debris, and minimize noise during reasonable hours. Emergency leak repairs get priority. Water in someone's apartment is an emergency.
Get a Free Quote →
Gutter Installation
We custom-form seamless aluminum gutters on-site from a continuous coil of .027 gauge stock. No factory seams means no seam failures. We form them to the exact length your fascia requires. One piece, one gutter, no leaks.
Get a Free Quote →
Roof Inspection
Our 27-point residential roof inspection: (1) shingle condition and granule loss, (2) nail pops, (3) lifting tabs, (4) ridge cap integrity, (5) valley flashing, (6) step flashing at walls, (7) chimney flashing and counter-flashing, (8) drip edge condition, (9) pipe boot seals, (10) plumbing and HVAC vent integrity, (11) ridge vent function, (12) soffit ventilation, (13) gutter pitch and capacity, (14) downspout drainage, (15) fascia condition, (16) soffit condition, (17) ice dam evidence, (18) moss or algae growth, (19-27) attic: decking moisture, insulation displacement, rafter condition, bathroom exhaust routing, daylight penetration, ventilation balance, mold indicators, pest intrusion, previous repair evidence. Written report with annotated photos emailed same day.
Get a Free Quote →
Emergency Roof Repair
Our trucks carry 20x30 reinforced tarps, 2x4 lumber, plywood sheets, pipe boots, ridge cap shingles, flashing stock, roofing cement, and neoprene screws. We show up ready to secure your roof, not ready to schedule a follow-up appointment.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →